ANKOM XT10 Extractor

The ANKOMXT10 Extractor provides an Official Procedure for efficient and economical solvent extractions. The ANKOMXT10 Extractor has been subjected to rigorous testing over a broad range of sample types. Fat ranges from 0% to 100% have been determined using this procedure.
Samples are placed into filter bags which prevent sample transfer error. Filter bags serve to simplify handling and enable batch processing. The XT10 automatically recycles solvent and makes it ready for reuse. Solvent is manually added after each extraction.
- Official Method – AOCS Am 5-04
- Fully Automatic Operation
- Up to 100 Extractions/Day
- Solvent Recovery at 97% or Greater
- Automatic Solvent Recovery
- Eliminates Vent Hood Requirement
- Official Crude Fat Procedure – AOCS Am 5-04
- Low Cost & Easy-to-use
- Up to 100 Extractions per day
- Solvent Recovery at a rate of ~90%
- Microprocessor Controlled with LCD Readout
- Filter Bag Technology
- Small Footprint
Approved Procedure |
|
Low Cost |
|
Filter Bag Technology |
|
Solvent Recycling |
|
Simple Operation |
|
90°C Extraction Temperature |
|
Small Footprint |
|
Operating Specifications: ANKOM XT10
Sample Size: 1.0 – 3.0 grams
Fat/Oil Range: 0% – 100%
Samples per Batch: Up to 15
Operation Times
Crude Fat Extraction = 30 – 60 minutes*
Samples per Day
Crude Fat Extraction =Up to 100/day
Instrument Specifications
Operating Temperature: 90°C
Dimensions: 13″ w x 20″ d x 31″ h
Power Requirements: 110 – 240V, 50/60 Hz
Weight: 44 kg.
The ANKOM XT10 Extractor provides an Official Procedure for efficient and economical solvent extractions. The ANKOMXT10 Extractor has been subjected to rigorous testing over a broad range of sample types. Fat ranges from 0% to 100% have been determined using this procedure.
The XT10’s low cost provides an affordable high-volume solution. Batch processing allows for the extraction of up to fifteen samples at a time and up to 100 samples per day. A process temperature of 90°C accelerates extraction kinetics, reducing most extraction times to under 40 minutes. If using solvents such as diethylether please ask about seal upgrades.
Samples are placed into filter bags which prevent sample transfer error. Filter bags serve to simplify handling and enable batch processing. The XT10 automatically recycles solvent and makes it ready for reuse. Solvent is manually added after each extraction.
Warranty: 02 (Two) years from the date of Successfully completion of Supply.